X20 system modules • Analog output modules • X20AO4622
474
X20 system User's Manual 3.10
4.4.7 X20AO4622
4.4.7.1 General information
The module is equipped with four outputs with 13-bit (including sign) digital converter resolution. It is possible to
select between the current and voltage signal using different connection terminal points.
•
4 analog outputs
•
Either current or voltage signal possible
•
13-bit digital converter resolution
4.4.7.2 Order data
Model number
Short description
Figure
Analog output modules
X20AO4622
X20 analog output module, 4 outputs, ±10 V / 0 to 20 mA / 4 to
20 mA, 13-bit resolution
Required accessories
Bus modules
X20BM11
Bus module, 24 VDC keyed, internal I/O supply continuous
Terminal blocks
X20TB12
X20 terminal block, 12-pin, 24 VDC keyed
Table 99: X20AO4622 - Order data
4.4.7.3 Technical data
Product ID
X20AO4622
Short description
I/O module
4 analog outputs ±10 V or 0 to 20 mA / 4 to 20 mA
1)
General information
B&R ID code
0x1BA3
Status indicators
I/O function per channel, operating state, module status
Diagnostics
Module run/error
Yes, using status LED and software
Channel type
Yes, using software
Power consumption
Bus
0.01 W
Internal I/O
1.8 W (Rev. ≥ J0); 2.2 W (Rev. < J0)
Additional power dissipation caused by the actua-
tors (resistive) [W]
-
Electrical isolation
Channel - Bus
Yes
Channel - Channel
No
Certification
CE
Yes
cULus
Yes
cCSAus HazLoc Class 1 Division 2
Yes
ATEX Zone 2
Yes
KC
Yes
GL
Yes
GOST-R
Yes
Analog outputs
Output
±10 V or 0 to 20 mA / 4 to 20 mA, via different terminal connections
1)
Max. output current
10 mA at voltages >5 V
15 mA at voltages <5 V
Digital converter resolution
Voltage
±12-bit
Current
12 Bit
Conversion time
300 µs for all outputs
Settling time for output changes over entire range
500 µs
Power on/off behavior
Internal enable relay for booting
Table 100: X20AO4622 - Technical data
Summary of Contents for X20 System
Page 2: ......
