B&R Industries Provit 5000, User Manual

Page: 122 / 400

Provit 5000 User’s Manual 121
Chapt
er
2
C
on
tro
lle
rs
Controllers • System Units with Socket 370
Fan RPM is constantly monitored and regulated separately by the MTC. The RPM depends on
the temperature measured.
Alarm Fan LED Alarm Signal
Short Description Processor Type Min
1)
1) Negative temperatures are set to 0°
Max On Off On Max Sample kHz
Internal Processor
Temperature
Default Values
0° 127°
85° 83° 60° 76°
✓
0AAH 2
Celeron 300
2)
2) Starting with the new BIOS Version 1.05 for the IPC5000C and IPC5600C, both temperature alarm and fan control depends on the
processor.
85° 83° 60° 76°
Celeron 366
2)
85° 83° 60° 76°
Celeron 433
2)
85° 83° 60° 76°
Celeron 566
2)
87° 85° 62° 78°
Pentium III 600
2)
80° 78° 55° 61°
Pentium III 850
2)
78° 76° 53° 69°
Processor Socket
Temperature
Default Values
0° 127°
80° 78° 55° 71°
✓
050H 1
Celeron 300
2)
80° 78° 55° 71°
Celeron 366
2)
80° 78° 55° 71°
Celeron 433
2)
80° 78° 55° 71°
Celeron 566
2)
85° 83° 59° 75°
Pentium III 600
2)
78° 76° 52° 68°
Pentium III 850
2)
76° 74° 50° 66°
I/O Slot Temperature 0° 127° 68° 66° 40° 56°
✓
050H 1
Processor Fan (nominal 5400 RPM)
0 RPM 6100
RPM ~70% ~71%
✓
0AEH 2
Display Temperatures 0° 127°
3)
3) Temperature alarms depend on the display unit used
✓
051H 1
RS485 Isolation Interrupted 033H 1
Table 92: MTC temperature monitoring IPC5000C and IPC5600C