Technical data • Complete system
Chapter 2
Technical data
Panel PC 2100 swing arm user's manual V1.00
35
2.5 Layout of devices with buttons
Devices with buttons come equipped with the following interfaces, buttons and switches on the front:
•
RFID read/write transponder unit
•
USB interface
•
Selector switch (landscape AP99D only)
•
Green and red pushbuttons
•
Key switch
•
E-stop
The button/switch interface is located inside the Panel PC. To access it, the interface cover on the back must be
removed first (see "Removing the interface cover" on page 86).
RFID transponder
read/write unit
Front USB
Selector switch Green pushbutton Red pushbutton Key switch
E-stop
Figure 10: Front view of a device with buttons (AP99D)
2.5.1 Buttons / Switching elements
Button / Switch / Transponder
Element
Switching element
RFID read/write transponder unit
"RFID read/write transponder unit" on page 176
-
Selector switch
"Selector switch RAFIX 22 FS+, 1.30.272.102/2200" on
"Switching element RAFIX 22 FS universal,
1.20.126.005/0000" on page 177
Green pushbutton
"Pushbutton RAFIX 22 FS+, 1.30.270.021/2500" on page
"Switching element RAFIX 22 FS universal,
1.20.126.005/0000" on page 177
Red pushbutton
"Pushbutton RAFIX 22 FS+, 1.30.270.021/2300" on page
"Switching element RAFIX 22 FS universal,
1.20.126.005/0000" on page 177
Key switch
"Key switch RAFIX 22 FS+, 1.30.255.222/0000" on page
"Switching element RAFIX 22 FS universal,
1.20.126.005/0000" on page 177
E-stop
"E-stop RAFIX 22 FS+ "Plus 1", 1.30.273.502/0300" on
"Switching element RAFIX 22 FS+ PCB gold,
1.20.126.414/0000" on page 178
2.5.1.1 Button, switch and LED configuration
Each button and LED can be individually configured and adapted directly to the application. Various B&R tools
are available for this:
•
B&R Key Editor, B&R KCF Editor or B&R Control Center for Windows operating systems
•
Visual Components for Automation Runtime
Buttons and LEDs from each display unit are processed by the matrix controller in a bit string of 128 bits each.
The positions of keys and LEDs in the matrix are shown as hardware numbers. These hardware numbers can be
read directly from the target system using the B&R Key Editor, B&R KCF Editor or B&R Control Center.
