Technical data • Complete system
Chapter 2
Technical data
Panel PC 2100 swing arm user's manual V1.00
25
2.3 Electrical characteristics
2.3.1 +24 VDC voltage supply
The 3-pin male connector required for the power supply interface is not included in delivery. It can be ordered from
B&R using model number 0TB103.9 (screw clamps) or 0TB103.91 (cage clamps).
The pinout is listed in the following table. The supply voltage is protected internally by a soldered fuse (15 A, fast-
acting) to prevent damage to the device in the event of an overload (fuse replacement necessary) or if the voltage
supply is connected incorrectly (reverse polarity protection -> fuse replacement not necessary). The device must
be returned to B&R for repairs if the fuse is blown in the event of an error.
+24 VDC power supply
Protected against reverse polarity
Pin
Description
1
+
2
Functional ground
3
-
Model number
Short description
Terminal blocks
0TB103.9
Male connector 24 V 5.08 3-pin screw clamps
0TB103.91
Male connector 24 V 5.08 3-pin cage clamps
3-pin male connector
+24 VDC power supply
Table 18: +24 VDC voltage supply connection
Electrical characteristics
Nominal voltage
24 VDC ±25%
Nominal current
3.5 A
Starting current
Typ. 6 A; max. 10 A for <300 μs
Electrical isolation
Yes
Uninterruptible power supply
No
