5
STEP 1:
Before using your appliance for the first time, clean the trays and forks in warm
soapy water, rinse and dry thoroughly.
STEP 2:
Ensure the power cord fits between one of the gaps in the food trays and plug the
appliance into a mains power supply.
STEP 3:
Fill the compartments of the food trays with your favourite treats (biscuits,
chocolate, fruits, marshmallows, etc.)
STEP 4:
Turn the mains supply on and turn the dial on. The indicator light will start to
illuminate.
STEP 5
: Pre heat the heating element for a couple of minutes for best results. The appliance
is now ready to use.
CAUTION:
The heating element will get very hot. Do not touch these parts.
STEP 6:
Prepare s’mores sandwich with a chocolate bar placed between two plain biscuits
(or another biscuit of choice).
STEP 7:
Place a marshmallow on the forks and hold the marshmallow above the heating
element taking care not to touch the stainless steel cover with the marshmallow. Rotate the
marshmallow frequently until it browns and starts to melt.
NOTE:
Toasting marshmallow should take approximately 2 minutes.
STEP 8:
When the marshmallow is melted and toasted to your liking, place the melted
marshmallow on top of the chocolate bar on your s’mores sandwich and then place another
biscuit on top. Lightly press the ingredients together for a perfect s ‘mores sandwich.
STEP 9:
If you want to use the set as a chocolate fondue, break chocolate into small pieces
and place them in the melting pot. Put the melting pot on top of the heating element. Stir the
chocolate occasionally as it is melting.
CAUTION:
Never add chocolate directly into the heating element, always use the pot
provided.
STEP 10:
Once the chocolate has melted, Place your favourite treats on the forks and dip
into the melting pot.
STEP 11:
To turn the appliance off, turn the dial off and unplug it from the mains power
supply: the indicator light will go out.
CAUTION:
Hot surface
INSTRUCTIONS FOR USE