LTE Outdoor CPE
EN-25
3.
On Remote Access, select Enable from the drop-down list to enable
remote management function.
4.
Click APPLY to save changes.
Manage LED Light
Set the duration for the LED light to stay on.
1.
Click Advanced Mode tab and select Admin.
2.
Click Management.
3.
On LED Light On Timer, select the desired length of time from the
drop-down list.
4.
Click APPLY to save changes.
Select Operation Mode
Set the operation mode of the CPE.
1.
Click Advanced Mode tab and select Admin.
2.
Click Management.
3.
On Operation Mode, select one of the following options:
Bridge: Select Bridge mode if you will have another router in your
network to be set as the DHCP server. Clients in your network will directly
receive IP address assigned by the server. After selecting Bridge mode,
you may connect other routers or network devices. To access the CPE
web-based utility in bridge mode, you must configure the IP address of
the computer connected to the CPE with the IP address of the CPE.
Router: Select Router mode to use the CPE as a router. This is the
default mode.
4.
Click APPLY to save changes.
Summary of Contents for E500 Series
Page 1: ...EN 1 P N 65012500011 Rev A...
