1
SAFETY PRECAUTIONS
PLEASE READ BEFORE INSTALLING
WARNING: to prevent fire or shock hazard, do not expose this unit to rain or moisture. Care should be
taken to prevent objects or liquid from entering the enclosure. Never handle the power cord with wet
hands.
•
The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user of the
presence of uninsulated “dangerous voltage” within the product’s enclosure that may constitute a risk of
electric shock to you.
•
The exclamation point within an equilateral triangle is intended to alert the user of the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the unit.
•
Caution: To prevent the risk of electric shock, do not remove cover. No user-serviceable
parts inside.
Refer servicing to qualified service personnel.
•
Unplug the amplifier from the AC outlet when plugging in or unplugging cables, when left unused for an
extended period of time, moving the amplifier, or when you suspect lightning in your area.
•
Prevent damage to the power cord. Do not bend, pull, place objects on, alter, etc. Replace the power cord
if it becomes damaged. Always grasp the plug on the power cord when plugging in or unplugging the
amplifier from the AC outlet.
•
Your system may produce sound levels capable of causing permanent hearing loss. Do not operate for
extended periods of time at high volume levels.
•
Make sure the amplifier is placed on a level surface.
•
The amplifier is equipped with raised feet to provide ventilation, reduce acoustic feedback, and provide
protection against scratching the surface the unit is resting on. We advise against removing or altering
feet.
•
Do not stack anything on top of the amplifier (processor, source, etc.) Leave a minimum of 2” clearance
from the top of the amplifier to the next shelf (or component) to insure proper ventilation.
•
The amplifier should be located away from other sources that may be sensitive to heat.
•
Do not perform any internal modifications to the amplifier.
•
Always connect the amplifier’s power cord to an unswitched AC outlet for normal operation.
•
If young children are present, adult supervision should be provided until the children are capable of
following all rules for safe operation.
•
Do not plug the amplifier’s power cord into an outlet with an unreasonable number of other devices. Be
careful if using extension cords and ensure the total power used by all devices does not exceed the
power rating (watts/amperes) of the extension cord. Excessive loads may cause the insulation on the
cord to heat and possibly melt.
•
Mistaking
CONTROL OUTPUT
or
CONTROL INPUT
connectors for audio/video inputs or outputs may
damage your amplifier or other components.
•
Damage can occur to your speakers if the power rating of each individual driver is exceeded by the
amplifier. Ensure that all the drivers in your system are capable of handling not only the average power
being delivered by the amplifiers, but also the peak power that is likely to be generated during strong
passages.
If you are unsure of your speaker's power rating, contact the speaker manufacturer or the
dealer where you purchased them.
•
The amplifier should be serviced by qualified personnel when:
A. The amplifier is not functioning properly.
B. Objects
have
entered the chassis.
C. The amplifier was exposed to rain or other type of moisture.
D. The amplifier was dropped, or the chassis is damaged.
