©
Bandit Technologies Inc.
3b Using Your Bandit E-Bike Monitor
1.
Power on/off:
Hold the power button for 2 seconds to power up the
bike. Hold it for 3 seconds to power off. Tap the power button to switch
drive modes between “Front”, “Rear”, “Auto”, and “Max”. (This feature is
only available on Dual Wheel Drive models)
2.
Assisted Pedalling:
Press the “+” or “-” button to adjust the assist level
from 0 to 6 (level 7 is available for Dual Wheel Drive models). When your
assist level is at 0, press and hold “+” for 2 seconds to enable a short
6km/h (3.8mp/h) speed boost.
3.
Headlight Control:
Press and hold “-” button for 2 seconds to switch on
or switch off the headlight.
4.
Error Code Display:
When the electric control system fails, the meter
will display an error code automatically. See the table for more
information.
●
When an error code is displayed, you should use it to
troubleshoot the E-Bike.
5.
“Set” Button:
Press the "set" button to switch range, trip time, AVG
speed, and trip distance. Hold the button to enter the menu.
Page | 4