Bandit BRUSH BANDIT 65, Operating & Parts Manual

Page: 27 / 80

Bandit
PRINTED 5/01 PAGE 11
SAFETY DECALS
REACHING OR KICKING INTO THE INFEED HOPPER
WILL CAUSE SERIOUS INJURY OR DEATH!
DO NOT reach with your hand or kick with your foot inside the infeed hopper. The feedrolls are very powerful. Once
your hand or foot is grabbed by the feedrolls, you can be pulled into the chipper.
Do not think that you will be able to pull yourself out of the feedrolls. They will not let go!
There is absolutely no reason to work inside of the infeed hopper. If the feedrolls become tangled or clogged, stop
the machine and wait a minimum of three (3) minutes to clean them out.
Warning! When feeding material into the infeed hopper, always feed from the side of the infeed tray and then
turn away from material and walk away as wood feeds in. Chippers should be fed from curbside (right side)
whenever possible. Anytime operator is near infeed hopper. HE MUST be within easy reach of feed control
devices. Always be in a position to activate the Forward-Off-Reverse Control Bar.
DANGER! DO NOT use any body part or steel devices inside infeed
hopper area. Always use a “Wooden Push Paddle” with this chipper to assist
feeding material. It is owner’s and operator’s responsibility to use and keep a
“Wooden Push Paddle” with chipper, also to secure it when transporting
chipper. DO NOT operate this machine unless you have read the operator’s
manual and have been trained for safe operating procedures!
MODEL 65
MODEL 65 CHIPBOX
SAFETY DECALS