10
RESERVOIR PREPARATION
IMPORTANT!
The reservoir is fitted with a special cap with a breather hole that is
sealed for transit and must be opened before operation.
Do not attempt to move the cylinder rod before completing the
following steps;
1) Mount the reservoir on a bulkhead as far above the pump and
cylinder as possible using both the mounting holes provided.
2) Remove the transit screw and seal from the cap to open the
breather. Retain for future use.
3) Fill the reservoir to the max level indicated on the label using the
top-up oil included in the carton.
4) Turn the tap to the ‘ON’ position.
5) Check the mid-ships oil level and top up if necessary.
Transit screw
Seal
Summary of Contents for RAM T3
