¼ Turn
½ Turn
¾ Turn
1 Turn
Setting
Fog - Tiny droplets, not visible
Fog - Tiny droplets, not visible
Mist - Larger droplets, visible
Mist - Larger droplets, visible
Description
40
44
52
56
Droplet Size
(VMD, in
microns)
0.33/9.76
0.75/22.19
1.2/35.50
2.5/73.96
Flow Rate
(oz/ml per min)
PARTS AND PART LIST
Figure 4
CARE, MAINTENANCE, AND REPLACEMENT
PARTS
Always empty and flush the tank and hose after each use; never leave
chemicals in machine for extended periods of time.
Inspect spray hose and electric cord for wear or damage.
Protect nozzle when not in use.
Clean the filters on the bottom plate of the fogger regularly by
removing and gently rinsing with clean warm water, then allowing to
fully dry before reinserting. Replace when damaged as these protect
the motor.
•
•
User Manual
FLEX-A-LITE 2600 FOGGER
1
29103230
1608003992
1608003993
1608004427
1208001339
29103240
95151362
29103225
Clip
Spring
Venturi
Knob assembly
2
3
4
5
6
7
8
Number Description
Order
Number
(US)
Order
Number
(EU)
29103220
1608003991
1208001340
1608004029
1608004000
29103235
29108215
29103292
O-Ring
Sleeve
Screw
Screw
9
29103297
1608004003
1608004005
1608004001
29103299
29103293
Hex nut
Spacer
Nozzle
10
11
13
14
29103294
1608004002
1208001381
29108247
Screw
Hose assembly
18” (46 cm)
1608003887
22071433
Spring clamp
12
OPERATION
Follow all “Before Use” instructions above.
Connect unit to the designated electrical
supply:
•
Do not connect 120V units to 230V
power,
•
Do not connect 230V units to 120V
power.
•
If using an extension cord, ensure it’s
3-prong and grounded.
Turn on fogger by moving switch to “on.”
1.
2.
3.
4.
5.
6.
Figure 3
Turn the adjustment knob from ¼ of a turn to fully open depending on
what droplet size is appropriate for your application (Figure 3). Note
that droplet size varies with temperature and viscosity of the material
being dispensed.
Direct fog to treatment areas using the flexible hose.
IMPORTANT
When application is finished, first close adjustment knob
and second turn off power (Figure 4). Only then, open tank cap. Failure
to follow this sequence can result in liquid dripping into the hose and
destroying the motor.
2
bgequip.com