Note:
A VHF antenna is
not
provided by B&G. Consult your B&G dealer for advice if necessary.
1.2 Tools needed for installation
You will need the following tools:
•
Power drill (or hand drill) and drill bits
•
Philips screwdriver
•
Spanner
•
Jig saw (for a recessed installation).
•
V50 base station, with microphone
attached
•
Dust cover
•
GPS connector cable
•
Speaker connector cable
•
Power supply cable
(with 7 A fuseholder incorporated)
•
Spare 7 A fuse
•
Mounting bracket, with:
- 4 self-tapping screws
- 4 flat screws
- 4 plain washers
- 4 spring washers
- 4 nuts
- 2 mounting knobs
•
Handset mic wall hanger, with:
- 2 self-tapping screws
- 2 flat screws
- 2 plain washers
- 2 spring washers
- 2 nuts
•
2 M5 x 32 screws with 2 plain washers
and 2 nuts (for a recessed installation)
•
Operation Manual
•
Installation Manual
•
Warranty Card
•
DSC Warning Label
•
Template for flush mounting option
•
Declaration of Conformity document
(where applicable)
1 Installation preparation
1.1 Checklist
Check that you have all the following items
before
starting the installation. Contact your
dealer if an item is missing:
B&G - V50 & H50 Installation Instructions
6
