manualshive.com logo in svg

BANDELIN Sonorex Digiplus DL 102 H, Instructions For Use Manual

Share
Download
BANDELIN Sonorex Digiplus DL 102 H Instructions For Use Manual Download Page 14

4/

Preparation for operation

14/46

1586-006 en/2022-08

4  Preparation for operation

4.1 Installation site requirements

The installation location of the ultrasound bath must meet the fol-

lowing conditions:

• The installation surface must be horizontal, firm and dry.

• The load-bearing capacity must be sufficient for the ultrasound 

bath with the sonication fluid. For weight and work content, see 

chapter 

8.1

 

Technical data

.

• Adequate ventilation must be ensured. The air supply under the 

bottom of the unit may not be obstructed. If a sound proof box 

is used, it must also ensure sufficient ventilation. 

• A water connection should be available nearby to fill the ultra-

sound bath. A basin must be available to drain or pour out the 

sonication fluid.

4.2 Fitting ball valve

If supplied, fit the enclosed ball valve, the hose grommet and the 

hose as described in the assembly instructions included with the 

ball valve.

Summary of Contents for Sonorex Digiplus DL 102 H















































Reviews:

No comments

Brands by name

Popular brands

Load more brands