17 / 33
51826-001 en/2023-01
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
3.2
Setting the operating parameters
With the exception of the amplitude and power, the operating parameters can only be set while
in stand-by mode (pause mode). In order to set or edit the parameters, the desired
fi
eld can
be selected by pressing the “SET” key. The respective function can then be selected using
the
arrow keys. If the parameter has number values that can be edited, the editing mode
is then activated with the arrow key. In the marked area (inverse view) of the parameter,
the desired value can then be set with the
arrow keys. It is possible to move between
individual setting
fi
elds within the parameter using the arrow key. Editing mode is cancelled
with the “SET” or “START” keys.
The following operating parameters can be set:
•
Default power values (Power [W])
•
Default values for the sonication time (Time set [hh:mm:ss])
•
Default values for the pulsation of the ultrasound (turn-on and turn-o
ff
time) (Pulsation [s])
The operating parameters “Energy” and “Elapsed sonication time” cannot be edited.
