manualshive.com logo in svg

BANDELIN 184XIB.00158520.001, Instructions For Use Manual

Share
Download
BANDELIN 184XIB.00158520.001 Instructions For Use Manual Download Page 19

1786-001 en/2022-08

19/38

Operation

/5

• Type of soiling

• Type of goods to be treated, in particular materials

Note the information on the recommended sonication time from 

the agent manufacturer. To begin with, select as short a sonication 

time as possible to protect the objects to be sonicated and the 

ultrasonic oscillating tank. Check the result. Lengthen the sonica-

tion time if the result is not sufficient.

5.4 Pour in sonication liquid

CAUTION

Risk of scalding

– Do not pour hot water into the ultrasonic oscillating tank.

– Maximum filling temperature: 50 °C.

NOTICE

Damage due to condensation in the ultrasonic bath

At high humidity, condensation forms inside the device if you fill it 

with cold water.

– Do not pour cold water into the ultrasonic oscillating tank when 

humidity is high.

NOTICE

If you use an agent in powder form, do not pour it directly into the 

ultrasonic oscillating tank.

– Mix agents in powder form in another container before you pour 

them into the ultrasonic oscillating tank.

– Only pour the agent into the ultrasonic oscillating tank once it 

has dissolved completely.

Summary of Contents for 184XIB.00158520.001







































Reviews:

No comments

Brands by name

Popular brands

Load more brands