Controll-A-Door
®
Diamond PD & Roll-A-Pro
TM
Home Owner’s Manual
4
Warranty
CAD Diamond PD - Five (5) year/ 20,000 cycles
Roll-A-Pro
TM
- Two (2) year/ 5,000 cycles
Full parts and labour warranty on motor,
electronics and mechanical components of
the opener when installed by a B&D Dealer
(conditions such as annual garage door servicing
apply, refer to Section 11.3.b.i for information)
Tri-Tran
+
Technology
Only transmitters with the Tri-Tran
+
Technology
can operate with the latest Openers, reducing
the chance of interference from other radio
frequency sources. Tri-Tran
+
transmitters have the
ability to code into earlier model openers.
Code Hopping Technology
Every time a transmitter is used a new security
code is generated from over 100 billion possible
code combinations. This greatly enhances
the security of the system and makes “code
grabbing” a thing of the past!
Multi-Channel Transmitter
Multi-channel transmitters allow you to operate
other devices such as an adjoining garage door
or automated gate from the same handy unit.
Safety Reversing System
The automatic safety reverse system significantly
reduces the risk of death or serious injury if
trapped by a closing door. The safety reverse
force can be adjusted for environmental
conditions such as windy areas.
Memory Retention
In case of a power failure the opener does not
lose the transmitter codes or limit settings.
Manual Release
The manual release handle allows the door to be
operated by hand in the event of a power failure.
Self Locking
There is no need to manually lock your garage
door, as the opener ‘positively’ locks the door
when closed.
Service Fault Indicator
Flashing LEDs on the control panel easily identify
operational problems or service requirements.
Safety Beam Failure Emergency Close
When a safety beam prevents movement due
to any reason other than a ‘real’ obstruction, the
user can secure their property by pressing and
holding a button on the remote control or OSC
on the console.
Dynamic Door Profiling
Changing door characteristics are automatically
compensated for and “learnt” with each
operation of the door.
Courtesy Light
The LED courtesy light automatically switches
on for approximately 4
1
/
2
minutes (time
programmable) when operating the door. This
can also be programmed to turn on and off
from a transmitter. (Refer to Section 8.2 for
information).
Vacation Mode
A transmitter can be programmed to disable
the garage door opener radio receiver. This is
ideal if the door is to be left idle for prolonged
periods. (Refer to 8.3 for information)
Auxiliary Output
You can program a spare button on your remote
control transmitter to operate this output to
control items that can be switched using a
momentary close. (Refer to 8.4 for information)
Pet (Pedestrian) Mode
A transmitter can be programmed to open
the door partially to allow pets access to the
garage. The default PET Mode height can be
adjusted to a desired position. (Refer to 7.4 for
information). To code a transmitter button to
operate PET mode refer to 8.5 for information.
Battery Back Up (Diamond PD only)
Optional battery back up or solar power is
available.
2. Features
