background image

These instructions are intended for professional garage door installers. 
B&D encourages recycling of packaging as is reduces waste to landfill 
and achieves environmental benefits. 

Doc # 161074_01

Released  28/09/21

Auto-Lock Kit 

 

WARNING! This lock has been designed to work with B&D sectional overhead garage doors.  

If you fit this lock to other branded garage door, we cannot guarantee the performance of the lock and 

any performance warranties will not apply. This is subject to any Statutory Guarantees that may apply. Please refer 

to our warranty terms and conditions set out in the Openers Manual.

Any other brand of doors, please consult your B&D approved distributor.

 

This device will slide a bolt into the 
guide track automatically when 
the door is closed. DO NOT install in 
garages that have only one exit.

For emergency lock / unlock press the lock / unlock 

button on the Auto-Lock. This will disengage the lock 

from the guide track and allow you to disengage the 

opener and open the door.  The lock will automatically  

re-engage after the next complete cycle.

 

It is our strong recommendation that 

your opener be fitted with SAFETY 
BEAMS. 

 

Safety Beams detect any obstructions in the door/

gate’s path and override automatic operation 

if one presents.  These must be installed as in 

accordance with AS/NZS 60335-2-95:2020.

GARAGE DOOR LOCK - ORDER NO. 100040

ITEM

DESCRIPTION

QTY

1

GARAGE DOOR LOCK

1

2

COUNTERSUNK HEAD SCREW ZN M6 X 14

2

3

TAPTITE “P” BLACK SCREW M3 X 12

4

4

BATTERY C-LR14

2

5

WIRELESS BASESTATION MODULE

1

DRILLING TEMPLATE LABEL

1

 

WARNING!  Ensure the opener is not engaged 

when the Auto-lock is being used with only the 

bolt unit. Failure to do so may void the warranty 

of the opener.

CAUTION: 

Ensure bolt on Auto-lock is free to move 

during limit setup.

FASTENER PACK

ITEM

DESCRIPTION

QTY

10

FLANGE HEAD TEK SCREWS 20 X 25 CL4

4

11

MUSHROOM HEAD BOLTS 

1

/

4

” - 20 X 

1

/

2

” 

3

12

FLANGE NUT 

1

/

4

” 

3

DOOR BRACKET KITS

ITEM

STRIKER BRACKET FOR DOOR:

KIT

7

PANELIFT, PANELIFT GEN II, PANELIFT ICON, 

PANELMASTA, FIRMAPANEL, P7,  

DESIGN-A-DOOR, ENVIROPANEL, 

SMOOTHPANEL & TOUGHPANEL

MC0104

8

STORMSHIELD

MC0105

9

TONGUE AND GROOVE

MC0106

For B&D Sectional Doors. 

Auto-Lock Contents 

Bracket Kit 

(Kit sold separately)

Important Safety Instructions

 

WARNING!

•  DO NOT attempt to disassemble, repair or modify the product.  

This will invalidate the warranty.

•  DO NOT allow children to play with the Auto-Lock.

•  DO NOT install in garages that have only one exit.

•  DO NOT cover, paint or lubricate the product.

CAUTION:

Burns

•  DO NOT handle damaged or leaking batteries

•  The Auto-Lock Kit contains sealed lead-acid batteries that must 

be disposed of properly at the end of their useful life.

Muscle strain

•  DO NOT attempt to lift the door manually when the Auto-lock is 

engaged.

Summary of Contents for Auto-Lock Kit






Reviews: