The Solar Family Series Inverter
23
7.2.1 System Page
Figure 24
Power: the present power fed into the grid;
Today: Energy output to the grid during the present day, and updated once every 10 minutes;
Total: Sum of the total energy output to the grid, and updated once every 10 minutes.
To ensure a safe operation of the inverter under any temperature and electrical condition, the unit
will automatically derate the power to be supplied to the grid.
Power accuracy disclaimer:
The display values may deviate from the actual values and must not be used as a basis for
invoicing. The inverter’s measured values are required for the system management and to
control the current to be fed to the grid. The inverter does not have a calibrated meter.
: Indicate Power No Derating;
: Indicate Power Derating.
If the Power derating occurs, the detailed
reason will show in “MESSAGE” page.
Next to the Power status
symbol, the LCD displays operation condition:
Waiting Mode, Self Testing
Mode, On-grid Mode, and Fault Mode.
: Indicate the inverter occur some faults, and the detailed information
will show in
“MESSAGE”
page
If
the inverter has no fault, the symbol will disappear.
7.2.2 Message Page
Figure 25
The system status is identified through t
he MESSAGE page
; the first line displays inverter
operation condition:
Waiting Mode, Self Testing Mode, On-grid Mode, and Fault Mode.
The
following images are the symbol of power derating reason when inverter
derates.
: Indicate input voltage values are too high or too low;
: Indicate the ambient temperature is particularly high;
SYSTEM
Power : xxxxx W
Today
:
xxxxx
KWH
Total :
xxxxx
KWH
Waiting
Warning
MESSAGE
Waiting
I 00
1. Grid Fault
Operation Condition
Power Status
Operation
Condition
Power Derating reason symbol
Warning or fault info.
Fault
Status
