B&B Electronics Zlinx Xtreme IP67 ZXT9-RM, Instruction Manual

Page: 54 / 164

Document Number: pnZXTxRM-0712m
Page
54
PL
– Power Level
: Select/Read transmitter output power. This is a pull
down option. Selections are:
0
– 10dBm (Lowest)
1
– 12dBm (Low)
2
– 14dBm (Medium)
3
– 16dBm (High)
4
– 18dBm (Highest)
CA
– CCA Threshold
: Set/read the Clear Channel Assessment (CCA)
threshold. If the modem detects energy above the CCA Threshold, if will
not transmit. The CCA parameter is measured in units of -dBm. The
range is 0x0 to 0x50.
Sleep Mode (Non Beacon) : Configure low power options for non-
beaconing systems.
Figure 5-33 Sleep Mode (Non Beaconing) (ZXT24-RM)
SM
– Sleep Mode
: Set/read sleep mode: Pin Hibernate is lowest power,
Pin Doze provides the fastest wake up, Cyclic Sleep Remote with or
without pin wake up. This is a pull down option. Selections are:
0
– No Sleep
1
– Pin Hibernate
2
– Pin Doze
3
– Reserved (NOT USED)
4
– Cycle Sleep Remote
5
– Cycle Sleep Remote with Pin
ST
– Time Before Sleep
: Set/read time period of inactivity (no serial or
RF data is sent or received) before activating Sleep Mode. The ST
parameter is used only with Cyclic Sleep settings (SM=4-5). Set ST on
Cyclic Sleep Coordinator to match Cyclic Sleep Remotes. Range is 0x1
to 0xFFFF.