Documentation Number 3PCIO1-0903 Manual
Chapter 3
17
B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Comm. Pk. – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445
Windows 2000 Professional
This section covers device driver installation for Windows 2000
Professional. Windows Classic settings used as standard.
The 3PCIO1 drivers are unique to this series of cards. If at some
point in the future, you want to update these drivers, remove these
drivers before installing the new version. See Removal on page 34.
1.
Configure the card to the desired RS-232/422/485 mode using
the 3 JP1 jumpers.
2.
Install the card in the slot. Start the computer as Administrator or
ask your system administrator to install the software.
3.
Windows will detect the PCI card and start Found New
Hardware Wizard, to begin driver installation
4.
Windows 2000 will find new hardware twice. After the driver for
the PCI Serial Card installs, a new Com Port will be found and
the serial drivers for the Com Port will be installed.
5.
Click
Next
to continue.
