3-5
SSP-100
(Rev. G and later)
User's Manual
3.3 Frequently Asked Questions
Basic Configuration List Not Available:
A problem noted on some systems is after a basic configuration has been manually
selected the basic configurations list for the SSP-100 is no longer available. The solution
to this problem is to check the “Use Automatic Settings” box and allow Windows
95/98/ME to reconfigure the SSP-100 card. The basic configurations list should once
again be visible.
Base I/O Address Resource Modification Not Allowed:
The SSP-100 is configured to allow only a fixed number of base I/O addresses. To
change the I/O address resources for the SSP-100 select another “Basic Configuration”.
Refer to the Basic Configurations table for a list of the availabe I/O address resources
for the SSP-100
Summary of Contents for Quatech SSP-100
Page 6: ...SSP 100 Rev G and later User s Manual 2 1 This page intentionally left blank ...
Page 18: ...3 1 SSP 100 Rev G and later User s Manual This page intentionally left blank ...
Page 38: ...7 1 SSP 100 Rev G and later User s Manual This page intentionally left blank ...
Page 40: ...SSP 100 User s Manual Revision 3 20 February 2005 P N 940 0074 320 ...
