background image

ii 

FCC Radio Frequency Interference Statement 

This equipment has been tested and found to comply with the limits for a Class A computing device, pursuant to Part 15 of the FCC 
Rules.  These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a 
commercial  environment.    This  equipment  generates,  uses  and  can  radiate  radio  frequency  energy  and,  if  not  installed  and  used  in 
accordance with the instruction manual, may cause harmful interference to radio communications.  Operation of this equipment in a 
residential area is likely to cause harmful interference in which the user will be required to correct the interference at his own expense.  
Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. 
The use of non-shielded I/O cables may not guarantee compliance with FCC RFI limits.  This digital apparatus does not exceed the Class 
A limits for radio noise emission from digital apparatus set out in the Radio Interference Regulation of the Canadian Department of 
Communications. 
Le  présent  appareil  numérique  n’émet  pas  de  bruits  radioélectriques  dépassant  les  limites  applicables  aux  appareils  numériques  de 
classe A prescrites dans le Règlement sur le brouillage radioélectrique publié par le ministère des Communications du Canada. 

Limited Lifetime Warranty 

Effective for products of B&B Electronics shipped on or after May 1, 2013, B&B Electronics warrants that each such 
product shall be free from defects in material and workmanship for its lifetime. This limited lifetime warranty is 
applicable solely to the original user and is not transferable. 

This warranty is expressly conditioned upon proper storage, installation, connection, operation and maintenance of 
products in accordance with their written specifications.  

Pursuant to the warranty, within the warranty period, B&B Electronics, at its option will: 

1. Replace the product with a functional equivalent; 

2. Repair the product; or 

3. Provide a partial refund of purchase price based on a depreciated value. 

Products of other manufacturers sold by B&B Electronics are not subject to any warranty or indemnity offered by 
B&B Electronics, but may be subject to the warranties of the other manufacturers. 

Notwithstanding the foregoing, under no circumstances shall B&B Electronics have any warranty obligations or any 
other liability for: (i) any defects resulting from wear and tear, accident, improper use by the buyer or use by any 
third party except in accordance with the written instructions or advice of the B&B Electronics or the manufacturer of 
the products, including without limitation surge and overvoltage conditions that exceed specified ratings, (ii) any 
products which have been adjusted, modified or repaired by any party other than B&B Electronics or (iii) any 
descriptions, illustrations, figures as to performance, drawings and particulars of weights and dimensions contained 
in the B&B Electronics’ catalogs, price lists, marketing materials or elsewhere since they are merely intended to 
represent a general idea of the products and do not form part of this price quote and do not constitute a warranty 
of any kind, whether express or implied, as to any of the B&B Electronics’ products. 

THE REPAIR OR REPLACEMENT OF THE DEFECTIVE ITEMS IN ACCORDANCE WITH THE EXPRESS WARRANTY SET 
FORTH ABOVE IS B&B ELECTRONIC’ SOLE OBLIGATION UNDER THIS WARRANTY.  THE WARRANTY CONTAINED IN 
THIS SECTION SHALL EXTEND TO THE ORIGINAL USER ONLY, IS IN LIEU OF ANY AND ALL OTHER WARRANTIES, 
EXPRESS OR IMPLIED, AND ALL SUCH WARRANTIES AND INDEMNITIES ARE EXPRESSLY DISCLAIMED, INCLUDING 
WITHOUT LIMITATION (I) THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND OF 
MERCHANTABILITY AND (II) ANY WARRANTY THAT THE PRODUCTS ARE DO NOT INFRINGE OR VIOLATE THE 
INTELLECTUAL PROPERTY RIGHTS OF ANY THIRD PARTY.  IN NO EVENT SHALL B&B ELECTRONICS BE LIABLE FOR 
LOSS OF BUSINESS, LOSS OF USE OR OF DATA INTERRUPTION OF BUSINESS, LOST PROFITS OR GOODWILL OR 
OTHER SPECIAL, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES.   B&B ELECTRONIC SHALL DISREGARD 
AND NOT BE BOUND BY ANY REPRESENTATIONS, WARRANTIES OR INDEMNITIES MADE BY ANY OTHER PERSON, 
INCLUDING WITHOUT LIMITATION EMPLOYEES, DISTRIBUTORS, RESELLERS OR DEALERS OF B&B ELECTRONIC 
WHICH ARE INCONSISTENT WITH THE WARRANTY, SET FORTH ABOVE. 

 

Summary of Contents for McBasic-Gigabit


















Reviews: