5
DC Terminal Block Wiring Instructions
The IE-Giga-MiniMc can be powered via the DC terminal block. From a power
source, connect to any one positive and any one negative terminal on IE-Giga-
MiniMc.
Connected to Chassis
NOTE
When using stranded wire, the leads must be tinned and equivalent to a 16 AWG solid
conductor. The DC terminal block is protected against mis-wiring. If the unit is mis-
wired, positive power lead to the negative terminal and negative power lead to the
positive terminal, it will not function. When powering a unit with voltages near the
upper limit of the device’s specification (for example: 48 volts) take precautions to limit
the voltage at the units terminal block. When turning on high voltage DC circuits, initial
voltages may momentarily exceed the unit’s specification.
Summary of Contents for IE-Giga-MiniMc
Page 1: ...IE Giga MiniMc Operation Manual...
Page 16: ...13...
