ABOUT THE GIGA-MCBASIC-II
The Giga-McBasic-II provides two conversions between 10/100/1000 Base-T twisted pair and
100/1000 Base-SX/FX fiber. This device Auto Negotiates speed and duplex on the copper port and
the fiber 100/1000 Mbps, FDX. There is a fixed
The Giga-McBasic-II, SFP* is an SFP port-based model, includes two 10/100/1000 Mbps RJ-45
connectors and one SFP port, which is designed to support MSA-compliant 1000 or 100 Mbps SFPs.
A DIP Switch enables LFPT (Link Fault Pass-Through), a diagnostic feature for troubleshooting a
fault fiber and an SFP version available; both support jumbo frames up to 10240 MTU.
The Giga-McBasic-II, TX/FX is a fixed fiber transceiver model, includes two 10/100/100 Mbps RJ-45
connectors and one 1000Mbps SC fiber connector which can support Single Mode fiber or Multi
Mode fiber in Dual Strand or Single Strand fiber. A DIP Switch enables LFPT (Link Fault Pass-
Through), a diagnostic feature for troubleshooting a fault condition on a segment.
condition on a segment. Each model will detect the SFP and run at the speed for which the SFP
was designed. SFPs can be purchased from B&B Electronics to accommodate Single Mode or Multi
Mode fiber in Dual Strand, and Single Strand fiber for Single Mode.
NOTE
CWDM fiber options are available for all models.
1