Introduction
Manual Documentation Number ESR90x-0508m
Chapter 1
5
B&B Electronics Mfg Co Inc – 707 Dayton Rd - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Serial Server Quick Start Guide
For descriptive purposes this Quick Start Guide considers a typical
configuration consisting of a
PC
connected via an Ethernet LAN to an
ESR902 Serial Server
connected to the RS-232 port of a
serial device
.
Hardware Setup
LAN
Ethernet
cable
Ethernet
cable
RS-232
cable
Serial Device
ESR902
PC
Figure 2.
Typical Hardware Setup
Step 1:
Connect the
Serial Server
to the network using a standard network
cable.
Step 2:
Connect the
Serial Server
to the RS-232 port on the
serial device
.
N
N
o
o
t
t
e
e
:
:
If the serial device is configured as a DCE use a straight-through serial cable. If
the serial device is configured as a DTE use a crossover (null modem) cable.
Step 3:
Set the
Run/Console
DIP switch to the
Run
position.
Step 4:
Apply power to the
Serial Server
.
Software Installation
Using the CD included with the
Serial Server
, install the
VLINX Manager
software on the configuring computer.
