Hardware Description
12
Manual Documentation Number EIR418-2SFP-T – 0109m
www.bb-elec.com
www.bb-europe.com
Second, swivel the metal latch away from the switch and pull the transceiver out.
Pull out from the SFP module
Cabling
Use unshielded twisted-pair (UTP) or shielded twisted-pair (STP) cable.
10Mbps: Use category 3, 4, 5 or greater cable
100Mbps: Use category 5 or greater
1000Mbps: Use category 5e or greater cable
Cable distances should be less than 100 meters (328 ft.) long.
Wiring the Power Inputs
Follow the steps below to insert the power wire.
1.
Insert the positive and negative wires into the V+ and V- contacts on the terminal block
connector.
