B&B Electronics EIR505-xx User Manual Download Page 33

Page: 33 / 65

Manual Documentation Number: EIR505-xx_5107m

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com

B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com

Switch Settings

Used to assign the system name, location and to view system information

System Name:

Assigns a name to the switch. The maximum length is

64 bytes

System Location:

Assigns a physical location for the switch. The

maximum length is 64 bytes

System Description:

Displays the description of switch. This is read

only and cannot be modified

Firmware Version:

Displays the firmware version

Kernel Version:

Displays the kernel software version

Hardware version:

Display the hardware version

MAC Address:

Display

the unique hardware address assigned by

manufacturer (this value is different for each switch)

Switch settings interface

[NOTE]

If the configuration is not saved, it will be lost when the switch

is powered off.

[NOTE]

The Firmware, Hardware, and Kernel versions listed above are

current as of the date this manual was produced.

Summary of Contents for EIR505-xx


































































Search results

Summary of Contents for EIR505-xx

Reviews:

Related manuals for EIR505-xx

Brands by name

Popular brands

B&B Electronics EIR505-xx, User Manual

Search results

Summary of Contents for EIR505-xx

Reviews:

Related manuals for EIR505-xx

Brands by name

Popular brands