5. Several predefined
Basic Configurations
have been included for the DSP-100
(see Figure 5. DSP-100 Basic Configuration Table). The Basic Configurations
provide many combinations of the operating modes and options listed below.
See the
Hardware Information
section of this manual for complete
descriptions.
When the
Use Automatic Settings
check box is enabled Windows 95/98/ME
will attempt to configure the DSP-100 in the order listed in the Basic
Configurations table.
Scratch Pad
8x
Any
0003
Scratch Pad
Normal
Any
0002
ISR
8x
Any
0001
ISR
Normal
Any
0000
Scratch
Pad/ ISR
Clock
Speed
I/O Range***
Basic
Configuration
*** Any indicates variable value; this value may or may not be user selectable depending on
platform.
6. Select a
Basic Configurations
that displays "No conflicts" in the bottom
display region titled
Conflicting Device List
from the drop down list.
7. To modify the
Interrupt Request
setting click the resource name and click
the
Change Setting
button. An Edit Resource window will open up. Inside
this window click on the up/down arrows to the right of the Interrupt
Request value. This scrolls you through all of the allowable resources for
your hardware. Pay attention to the conflict information at the bottom of the
window. Do not select a value that causes a conflict with any other installed
hardware.
8. If any changes have been made to the DSP-100’s configuration the card will
automatically be reconfigured to the new resources specified. Any time a
PCMCIA card of this type is inserted Windows 95/98/ME will attempt to
configure the card at these resource settings. Click the
Use Automatic
Settings
box to reset this card type for automatic configuration.
3.3 Frequently Asked Questions
Basic Configuration List Not Available:
A problem noted on some systems is after a basic configuration has been manually
selected the basic configurations list for the DSP-100 is no longer available. The
solution to this problem is to check the “Use Automatic Settings” box and allow
Windows 95/98/ME to reconfigure the DSP-100 card. The basic configurations list
should once again be visible.
Windows 95/98/Millennium (ME)
3-3
www.bb-elec.com
International Office:
707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104
European Office:
Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
