AirborneDirect™ Ethernet Adapter Quick Start Guide
100-8105-100G
3
3/17/2010
Table 1 - Security Settings Required by Security Type
Parameter
D
isa
b
le
W
EP6
4
W
EP1
2
8
W
PA
-PS
K
LE
A
P
W
PA
-L
EA
P6
4
W
PA
-L
EA
P1
2
8
W
PA
-PS
K
6
4
W
PA
-PS
K
1
2
8
W
PA
-PS
K
1
2
8
-T
K
IP
W
PA
2
-PS
K
W
PA
-PS
K
-T
K
IP
TL
S
PE
A
P
TT
LS
W
PA
-F
A
ST
W
PA
2
-F
A
ST
W
EP-
LE
A
P
Comments
EAP-FAST Provisioning Type
Actual setting dependant upon if new credentials are available.
Maximum Number of EAP-Fast Servers
LEAP User Name
LEAP Password
EAP Anonymous Identity
Optional
EAP Phase 1 String
EAP Phase 2 String
Default WEP Key
Key value must have key installed
WEP Key 1 - 4
One or more keys must be set
WPA Pre Shared Key (PSK)
EAP-Identity
EAP Password
If PFX/P12 certificate being used this is not required.
CA Certificate File Name
Optional for EAP-FAST
Client Certificate File Name
Private Key Filename
Only required for PEAP and TLS if PFX/P12 certificate being used.
Private Key File Password
Only required for PEAP and TLS if PFX/P12 certificate being used.
Security Types
Table 2 - LED State Description
LED
Color
Airborne Device State
POWER
Adapter is not powered.
Adapter is powered.
POST
Adapter is not powered.
Adapter failed Power On Self Test (POST) and is not configured for wireless communication.
Adapter passed POST but is not configured for wireless communication.
Adapter passed post and is configured for wireless communication.
LINK
Adapter is not powered.
(Periodic Blinking) Adapter is searching for a valid network (Access Point) that matches device’s configuration.
Adapter has successfully associated with an Access Point.
COMM
If Power LED is also Off then Adapter is not powered.
If Power LED is On then either:
A physical connection detected on Ethernet cable.
No TCP session from wireless interface has been established.
No physical Ethernet connection has been detected.
(Blinking – OFF/Red) A physical Ethernet connection has been detected and there is Ethernet traffic across the interface. No TCP
connection to the adapter has been established on the wireless interface.
A TCP connection to the adapter from the wireless interface has been established but no physical connection on the Ethernet
interface has been detected.
(Blinking – Green/Orange) A physical Ethernet connection has been detected and there is Ethernet traffic across the interface. A TCP
connection to the adapter has been established.
A physical Ethernet connection has been detected. A TCP connection to the adapter has been established from either the Ethernet or
Wireless interfaces but no traffic has been detected.
