background image

Documentation Number 232BSS4-2907m 

 

19 

 

&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com 

B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com 

 

Figure 2.3 shows a typical setup, with 16 devices sending 

information at random times to the PC. The switches at Level 2 receive the 
data and send it on to the Level 1 switch. The Level 1 switch buffers the 
data and sends it to the PC. Each of the switches will automatically send the 
data when it is available. If another port has access to the PC, the data will 
be buffered until a path is available. 
 
 
Slave Devices that Automatically Send their Data: 
 
 

For best results in an automatic system, the 232BSS4s in the 

system should be set up the following way. 
 

 

Set the switches to turn on the Auto Select feature. 

 

Set the Port Timer to 0 

 

Set the Inactivity Timer on all of the switches to somewhere 
between 20 and 500 milliseconds, depending on the space 
between data packets and the response time required to 
each connected device. 

 

If you need your software to identify which port sent the data, 
set up the port preamble on the Level 2 switches. Set each 
port to have a unique preamble. The preamble can be 1, 2, 3, 
or 4 characters long, and any characters can be used. The 
preamble will be added to the beginning of each new data 
packet arriving at the PC. The data collection software on the 
PC should be written to recognize this preamble as an 
address or identifier of the data source. 

Summary of Contents for 232BSS4














































Reviews: