Installation and Operations Manual
— Model B3X Series
11
B&B ARMR
A Division of B&B Roadway and Security Solutions 0B30-9001 Revision E2
Check hoses for wear.
Check the operation of the control panel(s).
Check the control panel’s buttons and lights for proper operation and replace
if necessary.
Update the operation and maintenance log.
3.4 Six-Month Inspections
We recommend you perform the following inspections every six months.
Repeat the visual inspections in the monthly inspection list.
Inspect the hydraulic system for signs of oil leaks.
CAUTION: The hydraulic system when in operation is under
extreme pressure. Verify pressure on the barrier is completely
relieved prior to removal of any hydraulic fittings.
Measure the resistance in any traffic loops and log the measurements.
When the inspection is complete, turn the power on and test cycle the barrier
to verify operation and control.
Check the PLC for normal operation of all logic and functions.
3.5 Annual Maintenance Inspections
We recommend you perform the following inspections annually.
Perform all quarterly maintenance steps.
Replace the hydraulic filter & fluid.
4 TROUBLESHOOTING
The table below provides a general guidance on identifying and correcting any problems
with your B3X bollard system. If you encounter problems that you cannot fix, contact
your local value added reseller or B&B ARMR and we will gladly work with you to
correct them.
4.1 B3X Troubleshooting Guide
The table below provides guidance on identifying and correcting any problems with your
B3X Bollard system. Please refer to the HPU O&M manual for more detailed
troubleshooting guides referring to the pumping unit. If you encounter problems that you
cannot fix, contact B&B ARMR and we will gladly work with you to correct them.
Symptom
Actions
Bollard does not raise
1.
Check power
2.
Check overload protector
3.
Check pressure gauge
4.
Manually raise the bollard by depressing the
