How to use handset
f
Operation
• Button Lift Function
Press the up or down button to adjust the height of the desk.
• Reset Function
(1)
When at the lowest position, long press the
button for more than 5 seconds to enter the reset mode. The reset will be
finished until the lift system rebound and stop after reaching the bottom.
(2)
When the lifting system fails, release the
button, long press the down button, the reset will be finished until the lift system
rebound and stop after reaching the bottom.
• Fault Treatment
(1) If there is no response when press the up or down button after
working continuously for a period of time please rest for more than 18
minutes before using again.
Common fault treatment
The following tips will help you detected and eliminate the common fault and
error. If the fault you met is not listed below, please contact with your supplier.
Only the manufacturer and professionals are capable for investigating and
correcting those fault and error.
Fault phenomenon
Method
No response while long pressing down
arrow after connected with a power supply
1 .Check if all the cables be connected
well
2.Contact your supplier or dealer
The desktop could not be lifted
1 .Check if overloaded, max loading:
20kg
2.Contact your supplier or dealer
Overwork
(Duty cycle:Max 2min on/18min OFF)
1 .Restart it after suspend for 18mins for
the working time is too long
2.Contact your supplier or dealer
Button
Attention
1. Power supply: AC100V-240V, 50/60HZ
2. Service Environment: 0-4CTC
3. Unplug the power plug before cleaning, wipe the dust on surface with slight wet dishcloth
when cleaning, be careful not to let the drops into the internal parts, not loose the
connector.
4. The electric box contains electronic components, metals, plastics, wires etc., so dispose
of it in accordance with each country's environmental legislation, not the general household
waste.
5. Check carefully to ensure correct and complete assembly before using.
6. Be familiar with all functions and program settings of the product before first use.
7. Children are forbidden to play on the product because of unforeseen action when
playing, so any dangerous consequences caused by this improper action will not be on
manufacturers.
8. Slight noise caused by the V-ribbed belt or brake system due to structure will not have
any effect on the use of the equipment.
9. Corrosive or abrasive materials are forbidden to clean the equipment. Must ensure that the
cleaner used will not pollute the environment.
10. Please make sure there is no hazard sources in your operating environment, e.g., do
not litter the tools around. Always be careful to treat the packaging materials in order to
avoid any possible danger, e.g. plastic bag may lead to choking hazard to children.
11. Keep the original package of the equipment if necessary in case of the future use in
transportation.
This marking indicates that this product should not
be disposed with other household wastes. To
prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of
material resources. To return your used device,
please use the return and collection systems or
contact the retailer where the product was
purchased. They can take this product for
environmental safe recycling.
STEP3
Wire all Cables to Adapter
Adapter
Switch
Cord
Port
Motor Wire Port
Adjust the desk upwards
Adjust the desk downwards
UP button
DOWN button
Waste disposal
Suomi Trading Oy
Areenakatu 7, 37570 Lempäälä
