T
RAN
SMITTER
MO
DE SWITCH
I
NG
J4C05 2.4GHz 4CH transmitter is supplied with MODE 2 as standard set, If needed, you could simply switch to MODE 1 by
easy steps as belowing:
Step 1: Open battery cover, switch MODE button to MODE 1.
Step 2: Use screwdriver to screw down the up-left screw tightly as photo shown.
Step 3: Screw down the down-left screw as photo shown, but not fully tighten, adjust this screw tightness so as to adjust the
throttle stick (right stick) spring tightness as you wanted.
Step 4: Screw off down-right screw completely until the screw head is almost even with back panel.
Step 5: Screw off up-right screw, but not completely. adjust this screw tightness so as to adjust the Elevator stick(left stick)
spring tightness as you wanted.
N
OTE
:
If switch back form MODE 1 to MODE 2, firstly switch MODE button to MODE 2 under battery cover, screw off the left
two screws, Screw down the right two screws, adjust down-left and up-right screws tightness so as to adjust the
Throttle stick and Elevator stick spring tightness as you wanted.
Step 2
Step 2
Step 1
Step 4
Step 5
14
