BanCon BC-B599, User Manual

Page: 6 / 17

01
02
10
11
08
08
08
03
10
11
Attach Front & Rear Stabilizer (NO. 2 & NO. 3) to Main
Frame (NO. 1) using 4 Pan Hexagon Socket Bolts (NO.
8), 4 Flat Washers (NO. 10) and 4 Spring Washers (NO.
11) as shown in the diagram. Make sure the bolts have
been tightly fastened. Tighten with Allen Wren
STEP 1
STEP 2
Let A connective Line from the Main Frame (NO. 1)
through Adjustable Handlebar Tube (NO. 4) by tying L
mini cable. Loosen and pull out Plum Screw Knob,
insert Adjustable Handlebar Tube (NO. 4) into Main
Frame (NO. 1) and adjust to desired height. Secure it in
place by reinserting and tightening the Plum Screw
Knob. Make sure the Plum Screw Knob engages the
holes in the Adjustable Handlebar Tube (NO. 4).Be sure
not to pinch the connective line.
Connect A Connective Line from Main Frame with A
Connective Line on Handlebar (NO. 5) and put the wires
into Adjustable Handlebar Tube (NO. 4).
Attach Handlebar (NO. 5) onto Adjustable Handlebar
Tube (NO. 4) with 4 Pan Hexagon Socket
Bolts (NO. 9) and 4 Spring Washers (NO. 11). Secure and
tighten with Allen Wrench.
NOTICE: Do not pull out A connective line with force
while assembling.
04