Uniterminal B32 User Guide
2.
Slightly push the device back.
3.
The device is sitting on the cradle in a secure mode.
To charge the device using the Single-Slot Cradle
1.
Connect the power supply to the cradle. Make sure the cradle
LED is green.
2.
Put the device on the cradle.
3.
Charging status LED on device.
4.
The LED will illuminate to confirm connection (off indicates not
charging, orange indicates charging, green indicates fully charged and
red indicates fault).
To charge the device using the USB / Charging Cable
1.
Connect the power supply to the USB or charging cable.
2.
Connect USB / charging cable to the bottom of the device.
3.
Insert appropriate AC adapter and plug in the power supply.
Removing
B
attery
1.
Slide the battery latch to the left.
2.
The battery cover will lift up slightly, grasp the battery cover and remove it.
3.
Remove the battery, right side first, from the battery compartment.
9
