Banana Pi BPI-M2+, Manual

Page: 105 / 172

In the graphical interface operation, formatted into
：
100M r 50M(Fat32 format) + 500M(Ext4 format)
Note: the formatting Fat32 and corruption partition size can be adjusted, can adjust the Fat32 is 200 m, corruption all USES
the remaining space
6,2,mount SD card
，
Fat32 Partition mounted as usb1
，
Ext4 Partition mounted asusb2.
sudomount /dev/sdb1 /mnt/usb1
sudomount /dev/sdb2 /mnt/usb2
6,3,made busybox root file system:
download link
：
https://github.com/BPI-SINOVOIP/BPI-files/blob/master/rootfs/busybox-1.24.2_bash-root.tgz
Extract the downloaded file to Ext4 partition
sudomount /dev/sdb2 /mnt/usb2
sudotar xvf busybox-1.24.2_bash-root.tgz -C /mnt/usb2
6,4,unzip SD card .tgz file to different partitions
cd BPI_M2P_bsp/SD
sudo tar xvf ./BPI-BOOT-bpi-m2p.tgz -C /mnt/usb1
sudo tar xvf ./BOOTLOADER-bpi-m2p.tgz -C /mnt/usb2
sudo tar xvf ./3.4.39-BPI-M2P-Kernel.tgz -C /mnt/usb2
6,5, Use bpi-boot tool production start (The first 100M)
sudo ../../bpi-tools/bpi-bootsel./100MB/BPI_M2P_720P.img.gz/dev/sdb
6,6 Production process takes long time, please wait until it finish.
7, when finish
：
BPI-M2+ board insert SD card and power on.
8,Cloning system, operating under BPI-M2+ board :
Insert SD card through the card reader into the usb port of BPI-M2+ board, called equipment: /dev/sda
Note: dd 700M here, already contains the system part of a total of 650M, 100M partition (tenure) + (Fat32) 50M+ 500M
(Ext4) = 650M
8.1 Direct cloning system:
dd if=/dev/mmcblk0 of=/dev/sda bs=10M count=70
8.1 Cloning to image file:
mount /dev/sda0 /mnt/sd
dd if=/dev/mmcblk0of=/mnt/sd/m2p_os.img bs=10M count=70
8.2 Cloning to eMMC flash:
dd if=/dev/mmcblk0 of=/dev/mmcblk1 bs=10M count=70
9,use img file made boot SD card:
How to compile BPI-M2+ BSP and boot image
105