Banana Pi BPI-M2 Series, Manual

Page: 45 / 67

After run order
，
can see the example SD card’s position in /dev/sdb
Please refer to fourth tips
，
after compilation will have Bananapi folder;then youwill see bootload/ Kernel these file from
download/BPI_M2_720P folder
。
Please write in former 100MB of SD card Individually
。
sudo dd if=boot0_sdcard.fex of=${card} bs=1k seek=8
sudo dd if=u-boot.fex of=${card} bs=1kseek=19096
sudo dd if=sunxi_mbr.fex of=${card} bs=1k seek=20480
sudo dd if=bootloader.fex of=${card} bs=1k seek=36864
sudo dd if=env.fex of=${card}bs=1k seek=69632
sudo dd if=boot.fex of=${card} bs=1k seek=86016
Step 1: BPI-M2 we will use first partition FAT32 don’t need to copy any file
，
for compatible with Kernel4.1.X in the near
future
Step 2: Copy modules to Second partition EXT4 of lib catalog from /BPI-M2-bsp/download/BPI_M2_720P/lib directory
Step 3:Please building wifi-firmware read’s directory (/system/vendor)and building Link from Second partition
，
because
BPI-M2 loading bcmdhd.ko will go to relative path searching WiFi-firmware
，
so we need building one link
：
$sudo mkdir system
$cd system
$sudo mkdir vendor
Android software
45