Banana Pi BPI-M1, Manual

Page: 81 / 110

Lamobo Openwrt image
OpenWrt firmware for BPI-R1 is updated, it support by Lamobo.
This firmware is built based on the OpenWrt master branch r42830.
Q&A
I am a new BPI-R1 user, how to use this firmware?
1. For a new user, we recommend to use the ready configured firmware. please download it from forum download
page: http://elastos.org/elorg_common/Lamobo-R1/2015-01-12/openwrt-sunxi-Lamobo-R1-sdcard-vfat-ext4.img
2. BPI-R1 accepts TF-card. Make sure your TF-card is bigger than 512MB. Using below command to generate a
bootable TD-card:
$ sudo dd if=openwrt-sunxi-BPI-R1-sdcard-vfat-ext4-configured.img of=/dev/sdX bs=1MB
3. Notes for the ready configured firmware:
The login username/password are root/root.
The software installation source has been set to “ http://elastos.org/elorg_common/Lamobo-R1/2015-01-12/” .
For details please refer “/etc/opkg.conf”. If you like to install your R1 from chaos.
Router address is: 10.0.1.1
If I want to use the original firmware, what can I do?
1. The original firmware is built directly from source code. It almost does not install software, except OpenWrt base
software. Please download it from:elastos.org/elorg_common/Lamobo-R1/2015-...sdcard-vfat-ext4.img.
2. Prepare a TTL thread for to connent OpenWrt bash terminal.
3. Connect to OpenWrt terminal throught TTL thread, modify OpenWrt packages source. All Of OpenWrt packages is
released on:
elastos.org/elorg_common/Lamobo-R1/2014-01-12/packages. You can change opkg.conf(/etc/opkgopkg.conf) content
to below:
src/gz chaos_calmer_base http://elastos.org/elorg_common/Lamobo-R1/2014-01-12/packages/base
src/gz chaos_calmer_luci http://elastos.org/elorg_common/Lamobo-R1/2014-01-12/packages/luci
src/gz chaos_calmer_management http://elastos.org/elorg_common/Lamobo-R1/2014-01-12/packages/management
src/gz chaos_calmer_packages http://elastos.org/elorg_common/Lamobo-R1/2014-01-12/packages/packages
src/gz chaos_calmer_routing http://elastos.org/elorg_common/Lamobo-R1/2014-01-12/packages/routing
src/gz chaos_calmer_telephony http://elastos.org/elorg_common/Lamobo-R1/2014-01-12/packages/telephony
And then, update opkg database: $ opkg update
4. Install OpenWrt packages. The below packages are needed:
$ opkg install kmod-b53
$ opkg install kmod-rtl*
$ opkg install hostapd
$ opkg install wpa-supplicant
$ opkg install luci-proto-ppp
$ opkg install ppp-mod-pptp
$ opkg install luci
$ opkg install luci-theme-bootstrap
Full package list please refer: kingone.elastos.org/2015/01/13/lamobo-r1-package-list/
5. Modify the network config.Append below text to “/etc/config/network”:
Lamobo Openwrt image
81