Deep clean after every 10 fills or as needed.
Remove Upper milling plate (B-1).
Remove Lower milling plate (B-2).
Dip 4-in-1 tool in rubbing alcohol (isopropyl
alcohol) and scrub vigorously (B-3).
To clear caked material, scrape with sharp end
of 4-in-1 tool as shown in A-1.
Rinse with cold water and air dry.
Replace milling plates into OTTO.
Make sure to clean the safety switch (A-3).
1.
2.
3.
4.
5.
6.
7.
Caution: Some flowers and botanicals can be toxic if ingested so if you
mill them in OTTO be extra careful to clean up any remaining residue.
You can safely use isopropyl alcohol for this purpose.
B-1
B-2
B-3
