13.2 SETTING A CHANNEL FOR VOLUME
Below, set up of a channel for VOLUME monitoring (sensor measures the liquid height):
Press icon MENU, choose the "Settings input I2'' (or I1):
Start-up input?
ON
Identification
Type the channel name with the keyboard
Measurement type
Volume
Unit for display
Select the unit of height measurement: mbar, mm or mmH2O
4 mA
Type the value in previous unit at 4 mA
20 mA
Type the value in previous unit at 20 mA
Blind area
Type the value in previous unit of blind area height
Tank type
Select the type:
Parallelepipedic, cylindric & horizontal, cylindric & vertical or specific
Dimensions are requested according the type of tank, for volume calculation (See below standard tank
shapes).
Specific tanks: it opens a new menu for linearization curve with up to 20 steps.
Complete all parameters according your tank
Screen N° 1
Select the unit for the numeric display: m³ (cubic metre) or l (litre)
Screen N° 2
Select the unit for graphical display: m³ (cubic metre) or l (litre)
Press RETURN , then SAVE to record all settings.
Standard tank shapes:
Parallelepipedic tank
Width
Height
Length
Cylindric & vertical tank with flat bottom
Height
Ø
Example:
Use of an hydrostatique level transmitter with 4-20mA output signal corresponding to 0 ... 2000 mm WC (water column). The sensor is in
inmersion at 200 mm above the tank bottom; Tank is cylindric & vertical, 1800 mm high and diam. 1000 mm. The digital display will be in
litre and graphic display in %.
BAMOWIZ
<- Hydrostatic level transmitter
20 mA = 2000 mm
Tank height = 1800 mm
Blind area = 200 mm
Ø = 1000 mm
4 mA = 0 mm
OXY
09-11-2021
M-452.01-EN-AA
452-01
/14
Dissolved oxygen monitor
BAMOWIZ OX 452
22, Rue de la Voie des Bans · Z.I. de la gare · 95100 ARGENTEUIL
Tel
Fax
+33 (0)1 30 25 83 20
+33 (0)1 34 10 16 05
Web
www.bamo.eu
INTERNATIONAL
