CALIBRATION
Open the buffer flasks.
A: Unscrew the cap
B: Remove the cap gasket
Take off the electrode protection end, then insert the calibration flask on the base of the holder and perform the calibration.
The neck of the flask with the standard solution is inserted directly on the holder. So, the electrode is immersed in the buffer solution and
protected from shocks.
When the calibration is completed: After removing the last buffer flask, screw back the electrode protection end, tightening it moderately;
Return the probe to the correct level of immersion.
MES
22-07-2021
M-130.01-EN-AB
130-01
/6
Plastic ph/ORP immersion
probe (1 electrode)
9336
22, Rue de la Voie des Bans · Z.I. de la gare · 95100 ARGENTEUIL
Tel
Fax
+33 (0)1 30 25 83 20
+33 (0)1 34 10 16 05
Web
www.bamo.eu
INTERNATIONAL
