BALZER ELIMINATOR VACUUM TANK Series, User Manual

Page: 28 / 58

24 Eliminator Vacuum Tank (Tandem) User Manual
7 . Close the boom valve . This will close the valve at the front of the tank and open the inline valve to break the suction in
the boom tube . With the inline valve open, the manure in the boom tube will empty back into the source tank .
8 . Remove the boom from the source tank and position so the flexible suction tip can be removed and placed back onto
its storage hooks on the left side of the unit (Figure 25) .
9 . Position the boom above the Boom Saddle . The Boom Saddle “OK to Park” light on the control panel will light indicating
it is high enough to swing the boom over the saddle .
Rite Rate Flow System
The Rite Rate Flow System consists of four components (Figure 26):
• Raven SCS660 NVM Controller and associated cables
• Raven 660 PWM Boost Box
• Krohne Optiflux 4100C Electromagnetic Flow Sensor with Signal Converter
• SkyTrak GPS Velocity Sensor
Raven SCS660 NVM Controller
The Raven SCS660 NVM Controller (Figure 27) monitors and adjusts the flow rate going to the injector . It has two programmable
presets and a manual override allowing for a custom application when necessary .
Figure 26
Raven SCS660 NVM
Controller
Krohne Optiflux 4100C
Flow Sensor with Signal
Converter
SkyTrak GPS
Velocity Sensor
Raven 660 PWM
Boost Box
OPERATION
Figure 24
Vacuum Pressure
Figure 25
Boom Operations (Continued)