Instructions during the usage:
Important:
•
To prevent short circuit, please do not use wet hands to operate the machine.
•
Never run the product without food loaded.
•
Do not run the motor more than 15 minutes continuously in one time.
1.
Insert the plug after fully assembled, Press ON button to start the machine.
2.
Clean the food and chop the suitable size to the feeding tube for later use
•
When juicing spinach, please cut the spinach into segments first, and control the
speed of feeding properly.
•
When juicing like melon & beet which have thick pericarp, get rid of the pericarp
and fruit grain firstly.
3. Put the food into feeding chute, push the food slowly with pusher. The bigger
feeding whole is suitable for feeding round fruits and vegetables, like apple, pear,
etc. The smaller feeding whole is suitable for feeding ingredients in bar-shape.
4. After squeezing and there is no juice from the juice mouth, push the "REV"
button slightly and release, then take away the cup after the screw stop working.
5. Standby Status
：
After assembling, close the power switch SW1, control panel get powered.
The LED digital display is indicated ”00”, the machine in standby status.
6.
Working program of three buttons.
A.
ON button program:
Gently forward click this button, product begins to work. The LED lamp in this
button is lasting bright in green color. Other green indicating lamps are not bright.
Then, the 2 LED digital display starts counting. It counts in seconds for the first
minute. After being indicated “60”, the digital display resets and counts in minutes.
The maximum timer interval is 15mins. It will exit the program after counting 15mins
continuously, and revert to standby status.( After continuous use 15mins, please
wait for 20mins around, then, restart. This method will extend product lifespan.
Summary of Contents for EK-3068
Page 1: ...SLOW JUICER Operation Manual Model EK 3068 ...
Page 14: ...www balzano com ...
