EN |
Juicer - tips and warnings
Never insert your hand or another object (e.g. a fork, knife, spoon or spatula) into the feeding tube. Only use
the pusher supplied with the appliance for this purpose. Wait until the sieve has completely stopped rotating
before you remove the lid.
- Always check the sieve before use. Do not use the juicer if you notice any damage like cracks, crazes or a
loose grating disc.
- The standard processing time for all juicing jobs is 30-90 seconds.
- Peel citrus fruits, pineapples, melons, etc. before you juice them.
- Stone cherries, plums, apricots, peaches, etc. before you juice them.
EN |
Blender - tips and warnings
Always assemble the sealing ring onto the blender blade unit before you attach the blade unit to the blender
jar.
Always let the appliance cool down to room temperature after you have processed two batches.
Never open the lid when the blade rotates.
◆
Built-in safety lock: you can only switch on the appliance when the blender jar has been assembled in such
a way that the ridge on the blade unit is aligned with the ‘locked’ symbol on the motor unit.
- To add liquid ingredients during processing, remove the measuring cup and pour them into the blender jar
through the hole in the lid.
- Pre-cut solid ingredients into smaller pieces before you process them.
- If you want to prepare a large quantity, process small batches of ingredients instead of a large quantity at
once.
- Use cooked ingredients when you blend a soup.
- When you process a liquid that is hot or tends to foam (e.g. milk), do not put more than 1 litre in the
blender jar to avoid spillage.
- If you are not satisfied with the result, switch off the appliance and stir the ingredients with a spatula.
Remove some of the contents to process a smaller quantity or add some liquid.
If ingredients stick to the wall of the blender jar:
1
Switch off the appliance and unplug it.
2
Remove the lid and use a spatula to remove the ingredients from the wall of the jar.
3
Keep the spatula at a safe distance of approx. 2cm from the blades.
Put the Bowl like this
way, make sure the
mark and the Main
body mark is on the
same way. Then you
can turn the bowl
clockwise, after you
heard a Click, and the
bowl is on the way as
per the right
photo ,the machine
can is assemble
correctly
When finished the
working, you can
turn the bowl out
by anti-clockwise
turning.
