Balzano AF716, User Manual

Page: 7 / 12

‘Settings’ in this chapter to determine the right temperature
6. Determine the required preparation time for the ingredient (see section
‘Settings’ in this chapter).
7. To switch on the appliance, turn the timer knob to the required preparation
time
Add 3 minutes to preparation time if the appliance is cold
Note: If you want, you can also preheat the appliance without any ingredients
inside. In that case, turn the timer knob for more than 3 minutes and wait
until the heating-up light goes out (after about 3 minutes). Then fill the
basket and turn the timer knob to the required preparation time.
a) The power-on light and the heating-up light go on.
b) The timer starts counting down the set preparation time.
c) During the hot air frying process, the heating-up light comes on and
goes out from time to time. This indicates that the heating element is
switched on and off to maintain the set temperature.
8. Some ingredients require to shake halfway during the preparation time (see
section
‘Settings’ in this chapter). By this way, pull the basket out of the
appliance by the handle and shake it. Then slide the basket back into the
magic fryer
Tip: If you set the timer half of the preparation time, you have to shake the
ingredients when you hear the timer bell ringing. However, this means
that you have to set the timer again to the remaining preparation time
after shaking.
9. When you hear the timer bell, the set preparation time has elapsed. Pull the
basket out of the appliance and place it on the heat-resistant holder