
ENGLISH
12 / 34
0006160209_201702
BURNER CONNECTION TO THE BOILER
HEAD UNIT ASSEMBLY
The combustion head is packaged separately from the body of
the burner.
Anchor the head unit to the boiler door as follows:
• Position the insulating seals on the sleeve (13).
•
Fasten the head unit flange (15) to the boiler (1) by means of
the stud bolts,washers and the nuts provided (7).
CAUTION / WARNINGS
Completely seal the space between the burner sleeve and
the hole in the refractory material inside the boiler door with
suitable material.
ASSEMBLY OF VENTILATION SYSTEM
•
The burner has an ambidextrous hinge opening for easy access
to the combustion head with fitted burner.
•
After installing the head group on the boiler, assemble the two
hinges (12) (17), on the buffer, using the screws (21) and the
corresponding washers, without fully tightening them.
•
Position the ventilating body (2) where the two hinges are
located.
•
Insert pin (10), then lock it using the nuts (23) and the
corresponding washers, taking care that the abutting surfaces
of the two hinges are perfectly in contact with the corresponding
surfaces of the scroll.Do not tighten the nuts (23) excessively,
as this may make hinge rotation difficult.
•
Tighten the centring pin (20) on the fan flange, opposite to the
hinge side.
•
Keeping the chains anchored to the eyebolts, turn the ventilating
body and place the fan flange in contact with the buffer flange,
making sure that the pin (20) is inserted in the corresponding
hole.
•
Close the burner using the screws (11) and the corresponding
washers.
•
Once the ventilating body is connected to the head unit, start
the final tightening of the four screws fixing the hinges, then
release the lifting chains or ropes.
• Connect the tie rod (15) to the gas adjustment throttle control
lever (26).
IMPORTANT
Every time the burner has to be opened, it is necessary to
disconnect gas solenoid valves connectors first.
32
12
17
21
21
10
23
23
20
0002937700
2
11
26
15
0002937710
Summary of Contents for TBG 800 MC
