baltur COMIST 72 DSPGM, Instruction

Page: 17 / 70

17
N° 0002901120
rev.:19/02/2002
N° BT 8666/3
DIAGRAM OF PIPES OF FEED SYSTEM FOR LIGHT OIL BURNERS
WITH MAXIMUM NOMINAL VISCOSITY (5 °E at 50 °C)
FUEL FEEDING HYDRAULIC DIAGRAM FOR ONE
OR MORE LIGHT OIL BURNERS
WITH MAXIMUM NOMINAL VISCOSITY (5 °E at 50 °C)
The combustible recovery and degasifier
tanks (diameter ~ 150, height ~ 400)
should be installed as near as possible
to the burner and should be about 0,5 m.
higher with respect to the burner's pump.
1 Main cictern
2 Filter
3 Circulation pump
4 Water and system drain
6 Fuel recovery and degasifier
7 One-way valve
8 By-pass (usually closed)
9 Feeding circuit presure regulator adjustment range between 0.2 and 1 bar
10 Pressure gauge (0 - 4 bar)
The combustible recovery and degasifier tanks (diameter
~ 150, height ~ 400) should be installed as near as
possible to the burner and should be about 0,5 m. higher
with respect to the burner's pump.
1 Main cictern
2 Filter
3 Circulation pumps
4 Water and system drain
5 Air-gas drain usually closed
6 Fuel recovery and degasifier
7 One-way valve
8 By-pass (usually closed)