CLEANING AND STORAGE
CLEANING
General speaking ,thorough cleaning of your
ATV W ill improve its runing performance and pro-
long the service life of many components.
1.Before cleaning the ATV:
a.Block off the exhaust pipe with plastic bag or
strong rubber band to prevent water entry.
b.Make sure the spark plug and all filler caps
are properly installed.
2. If the engine case is excessively dirty,wash
with degreaser,Do not use degreaser for wheel axles.
3.Rinse the dirt and remove oil dirt on the soft
hose.
CAUTION
Excessive water pressure may cause water
seepage and deterioation of wheel bearings,brakes,
transmission seals and electrical equipment.
4.W hen rinsing dirty material for many times,
use warm water and mild,detergent-type soap.Use
old toothbrush or bottle brush to wash hard -to-get-
-41-
WORKING SOCKET ATTENTION
1) The power connected to the socket should
be less than 100 watts.
2) The plug should be plugged in the plugged
in the socket firmly or the wire will be burned.
3) Do keep the engine running if you want to
use the plug-in facilities for more than 10 minutes.