8
W W W . B A L T I M O R E A I R C O I L .
E U
Push upwards on one side of the grid to
open
Slide the grid sideways.
Make sure the grid is secured by sliding it
to the end position (lock in place).
Depending on model the internal ladder is supplied in two parts. Only in this case, slide the two half ladders
into the pre-installed U-channels.
Internal service platform (full area)
(only for S15E xxxx-11xE and S15E xxxx-12xE units
)
Install bolts M10
Lift the ladder into place and drop the pre-welded bolts
into the mounting holes in the upper support channel.
No further fastening is required.
Note: The ladder can also be oriented towards the fill pack (similar procedure).
Internal ladder only
The Internal Service Platform (full area) and access ladder is factory installed, no field installation is required.
The platform can be accessed by opening the sliding grid.
Caution
Always close the sliding grid when standing on the platform.
