Baltimore Aircoil Company ICE CHILLER TSU-M, Operating And Maintenance Instructions Manual

Page: 26 / 38

Using good quality water (see section "About water care" on page 21),fill the tank following the steps outlined
below. For proper, long-term operation of the thermal storage unit, the tank must be filled exactly to the prescribed
level.
1. Remove the access cover on the top of the unit. Use a fill hose to fill the tank. See following table “Fluid
volumes” for the approximate volume of water required.
Model Tank volume
(liters of water)
Coil volume
(liters of glycol solution)
TSU-237M 11320 985
TSU-476M 22110 1875
TSU-594M 28250 2320
TSU-761M 34640 2990
TSU-L184M 8820 770
TSU-L370M 17250 1460
TSU-L462M 22030 1810
TSU-L592M 27020 2280
Fluid volumes
2. Continue filling the tank until the water level in the clear sight tube reaches the "0% ice build" level (See figure
“Water level in sight tube”.
CAUTION
For proper operation tank must be initially filled to the “0” ice build level.
W W W . B A L T I M O R E A I R C O I L . E U
26